Novel Fast Chromatography-Tandem Mass Spectrometric Quantitative Approach for the Determination of Plant-Extracted Phytosterols and Tocopherols

Phytosterols and tocopherols are commonly used in food and pharmaceutical industries for their health benefits. Current analysis methods rely on conventional liquid chromatography, using an analytical column, which can be tedious and time consuming. However, simple, and fast analytical methods can facilitate their qualitative and quantitative analysis. In this study, a fast chromatography-tandem mass spectrometric (FC-MS/MS) method was developed and validated for the quantitative analysis of phytosterols and tocopherols. Omitting chromatography by employing flow injection analysis—mass spectrometry (FIA-MS) failed in the quantification of target analytes due to analyte-to-analyte interferences from phytosterols. These interferences arise from their ambiguous MS fingerprints that would lead to false identification and inaccurate quantification. Therefore, a C18 guard column with a 1.9 µm particle size was employed for FC-MS/MS under isocratic elution using acetonitrile/methanol (99:1 v/v) at a flow rate of 600 µL/min. Analyte-to-analyte interferences were identified and eliminated. The false peaks could then be easily identified due to chromatographic separation. In addition, two internal standards were evaluated, namely cholestanol and deuterated cholesterol. Both internal standards contributed to the observed analyte-to-analyte interferences; however, adequate shift in the retention time for deuterated cholesterol eliminated its interferences and allowed for an accurate quantification. The method is fast (1.3 min) compared to published methods and can distinguish false peaks observed in FIA-MS. Seven analytes were quantified simultaneously, namely brassicasterol, campesterol, stigmasterol, β-sitosterol, α-tocopherol, δ-tocopherol, and γ-tocopherol. The method was successfully applied in the quantitative analysis of phytosterols and tocopherols present in the unsaponifiable matter of canola oil deodorizer distillate (CODD). β-sitosterol and γ-tocopherol were the most abundant phytosterols and tocopherols, respectively.     

Total Synthesis of a Partial Structure from Arabinogalactan and Its Application for Allergy Prevention

Arabinogalactan, a microheterogeneous polysaccharide occurring in plants, is known for its allergy-protective activity, which could potentially be used for preventive allergy treatment. New treatment options are highly desirable, especially in a preventive manner, due to the constant rise of atopic diseases worldwide. The structural origin of the allergy-protective activity of arabinogalactan is, however, still unclear and isolation of the polysaccharide is not feasible for pharmaceutical applications due to a variation of the activity of the natural product and contaminations with endotoxins. Therefore, a pentasaccharide partial structure was selected for total synthesis and subsequently coupled to a carrier protein to form a neoglycoconjugate. The allergy-protective activity of arabinogalactan could be reproduced with the partial structure in subsequent in vivo experiments. This is the first example of a successful simplification of arabinogalactan with a single partial structure while retaining its allergy-preventive potential.     

Linking Deltahedral Zintl Clusters with Conjugated Organic Building Blocks: Synthesis and Characterization of the Zintl Triad [R‐Ge9‐CHCH?CHCH‐Ge9‐R]4−

The accessibility of triads with deltahedral Zintl clusters in analogy to fullerene–linker–fullerene triads is another example for the close relationship between fullerenes and Zintl clusters. The compound {[K(2.2.2‐crypt)]₄[RGe₉‐CHCH CHCH‐Ge₉R]}(toluene)₂ (R=(2Z,4E)‐7‐amino‐5‐aza‐hepta‐2,4‐dien‐2‐yl), containing two deltahedral [Ge₉] clusters linked by a conjugated (1Z,3Z)‐buta‐1,3‐dien‐1,4‐diyl bridge, was synthesized through the reaction of 1,4‐bis(trimethylsilyl)butadiyne with K₄Ge₉ in ethylenediamine and crystallized after the addition of 2.2.2‐cryptand and toluene. The compound was characterized by single‐crystal structure analysis as well asNMR and IR spectroscopy.     

Dipolar Rotors Orderly Aligned in Mesoporous Fluorinated Organosilica Architectures

New mesoporous covalent frameworks, based on hybrid fluorinated organosilicas, were prepared to realize a periodic architecture of fast molecular rotors containing dynamic dipoles in their structure. The mobile elements, designed on the basis of fluorinated p‐divinylbenzene moieties, were integrated into the robust covalent structure through siloxane bonds, and showed not only the rapid dynamics of the aromatic rings (ca. 10⁸ Hz at 325 K), as detected by solid‐state NMR spectroscopy, but also a dielectric response typical of a fast dipole reorientation under the stimuli of an applied electric field. Furthermore, the mesochannels are open and accessible to diffusing in gas molecules, and rotor mobility could be individually regulated by I₂ vapors. The iodine enters the channels of the periodic structure and reacts with the pivotal double bonds of the divinyl‐fluoro‐phenylene rotors, affecting their motion and the dielectric properties.     

Synthesis and characterization of double hydrophilic block copolymers containing semi-rigid and flexible segments

3-Methyl-(E)-stilbene (3MSti) and 4-(diethylamino)-(E)-stilbene (DEASti) monomers are synthesized and polymerized separately with maleic anhydride (MAn) in a strictly alternating fashion using reversible addition-fragmentation chain transfer (RAFT) polymerization techniques. The optimal RAFT chain transfer agents (CTAs) for each copolymerization affect the reaction kinetics and CTA compatibilities. Psuedo-first order polymerization kinetics are demonstrated for the synthesis of poly((3-methyl-(E)-stilbene)-alt-maleic anhydride) (3MSti-alt-MAn) with a thiocarbonylthio CTA (methyl 2-(dodecylthiocarbonothioylthio)−2-methylpropionate, TTCMe). In contrast, a dithioester CTA (cumyl dithiobenzoate, CDB) controls the synthesis of poly((4-(diethylamino)-(E)-stilbene)-alt-maleic anhydride) (DEASti-alt-MAn) with pseudo-first order polymerization kinetics. DEASti-alt-MAn is chain extended with 4-acryloylmorpholine (ACMO) to synthesize diblock copolymers and subsequently converted to a double hydrophilic polyampholyte block copolymers (poly((4-(diethylamino)-(E)-stilbene)-alt-maleic acid))-b-acryloylmorpholine) (DEASti-alt-MA)-b-ACMO) via acid hydrolysis. The isoelectric point and dissociation behavior of these maleic acid-containing copolymers are determined using ζ-potential and acid–base titrations, respectively. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 219–227     

Electrochemically deposited ZnO films: an XPS study on the evolution of their surface hydroxide and defect composition upon thermal annealing

Electrodeposition from ZnCl₂ aqueous solution was performed to grow ZnO thin films on the surface of polycrystalline copper plates. Electrochemical parameters for deposition were optimized by means of cyclic voltammetry (CV). The morphology of the deposits was studied via scanning electron microscopy (SEM), and their chemical composition was ascertained by means of X-ray photoelectron spectroscopy (XPS). The effects of changing the deposition bath temperature (T _bath) and the role played by post-deposition treatments, such as temperature and time of annealing in air, were studied. SEM images of freshly deposited vs. annealed samples have shown that in the former case the films display a rough morphology with mixed grain/hexagonal platelets structures and in the latter smaller but more uniformly dispersed cubic grains. T _bath is found to be the key parameter to induce the different morphology in the deposited films, which reflects in a different chemical reactivity of surface species, as found on the basis of the binding energies and relative quantitative ratios between Zn 2p and O 1s peaks. In fact, a higher T _bath favours a more efficient desorption of OH groups upon annealing, the O 1s peak resulting to much more drastically modified oxide/hydroxide intensity ratio with respect to the case of the sample deposited at lower T _bath.     

Paramagnetic Lanthanide NMR Probes Signalling Changes in Zinc Concentration by Emission and Chemical Shift: A Proof of Concept Study

A zinc-selective probe based on a set of rare earth complexes of a modified DO3A macrocyclic ligand incorporating a tris-pyridylamine (TPA) moiety has been structurally characterised in solution and in the solid-state. One pyridine group possesses a tert-butyl substituent to serve as an NMR reporter group. The mono-capped square-antiprismatic Dy complex has a long bond (2.83 Å) to an apical N atom (pK_a 5.70 Eu) and binds to one water molecule on zinc binding. Zinc binding is reversible and involves all of the exocyclic ligand N donors; it is signalled by large (ratiometric) changes in Eu emission intensity, and by dramatic changes in the size (>50 ppm) and sign of the chemical shift of the paramagnetically shifted tBu resonances in Tb, Dy and Tm complexes. Slow trans-metallation was observed, leading to formation of an unusual di-zinc species in which one zinc ion is seven-coordinate and the other is six-coordinate.